Saturday, June 11, 2016

Selling




s

 Selling boat, free trailer, and motor for $1600 OBO

 So I need to prepare the next owner with my hope.   I have never had the O'Day in the water, so I know what has been told.  It is a shallow water draft, 3 foot or less. I began work on the inside and will add pictures.  Items that sold SEPARTERLY is lengthy.  Here is a start:
When purchased a new Margarine VHF with aerial.  A used Ritchie compass refit by B.T, Browley Norfolk, Va., and graded high.  New depth sounder with thru hull by Ray-marine, I think. Gimballed stove, cannot remember the brand...plus other equipment. Planned to seal the bottom, though it is OK, I have always done to past sailboats owned. Purchased several gallons of Interlux barrier coat.  Used hydro core plywood from boat supplier in Windsor, NC.  This wood was used to make replacement bulkheads and all the berths.  Have a several sheets left plus a  number of 4x8 teak plywood. New covering for the freeboard inside.   Started to remove portions of flooring to install a bilge pump. The teak was to be used for flooring.  The plan was to take teak, pinstripe to mimic teak and holly flooring,  A friend in Annapolis that refit taught me once stripped, six coats of strained marine clear poly. The trick is to make a cardboard template to form two sections. Had a deck plate for mast and reinforced deck below.  


Inside this blog, there are a number of posts relating to O'Day and items purchased.